Motion in a Plane — NCERT Solutions
Madhya Pradesh Board · Class 11 · Physics
NCERT question answers for Motion in a Plane, Madhya Pradesh Board Class 11 Physics: 21 textbook questions solved step by step. Covers Exercises.
Interactive on Super Tutor
Studying Motion in a Plane? Get the full interactive chapter.
Quizzes, flashcards, AI doubt-solver and a step-by-step study plan — built for NCERT solutions and more.
Free trial, no card needed.
The first 11 solutions are open to read. The other 10 are free with a Super Tutor account. Unlock all 21 free in Super Tutor
Exercises
3.1State, for each of the following physical quantities, if it is a scalar or a vector: volume, mass, speed, acceleration, density, number of moles, velocity, angular frequency, displacement, angular velocity.Show solution
From the chapter, scalars have magnitude only, while vectors have both magnitude and direction.
- Volume — scalar
- Mass — scalar
- Speed — scalar
- Acceleration — vector
- Density — scalar
- Number of moles — scalar
- Velocity — vector
- Angular frequency — scalar
- Displacement — vector
- Angular velocity — vector
Not sure why a step works? check your working in Super Tutor
3.2Pick out the two scalar quantities in the following list: force, angular momentum, work, current, linear momentum, electric field, average velocity, magnetic moment, relative velocity.Show solution
From the chapter, the two scalar quantities in the list are work and current. The others listed are vectors or are treated as vectors in this context.
Not sure why a step works? check your working in Super Tutor
3.3Pick out the only vector quantity in the following list: Temperature, pressure, impulse, time, power, total path length, energy, gravitational potential, coefficient of friction, charge.Show solution
The only vector quantity in the list is impulse. The other quantities given are scalars.
Not sure why a step works? check your working in Super Tutor
3.4State with reasons, whether the following algebraic operations with scalar and vector physical quantities are meaningful: (a) adding any two scalars, (b) adding a scalar to a vector of the same dimensions, (c) multiplying any vector by any scalar, (d) multiplying any two scalars, (e) adding any two vectors, (f) adding a component of a vector to the same vector.Show solution
- (a) Adding any two scalars — meaningful, provided they are of the same type/unit.
- (b) Adding a scalar to a vector of the same dimensions — not meaningful; scalars and vectors are different kinds of physical quantities.
- (c) Multiplying any vector by any scalar — meaningful; the result is another vector.
- (d) Multiplying any two scalars — meaningful; the result is a scalar.
- (e) Adding any two vectors — meaningful; vectors obey vector addition laws.
- (f) Adding a component of a vector to the same vector — not meaningful; a component is a scalar, while the vector itself is a vector.
Not sure why a step works? check your working in Super Tutor
3.5Read each statement below carefully and state with reasons, if it is true or false: (a) The magnitude of a vector is always a scalar, (b) each component of a vector is always a scalar, (c) the total path length is always equal to the magnitude of the displacement vector of a particle, (d) the average speed of a particle (defined as total path length divided by the time taken to cover the path) is either greater or equal to the magnitude of average velocity of the particle over the same interval of time, (e) Three vectors not lying in a plane can never add up to give a null vector.Show solution
Using the chapter:
- (a) True — magnitude of a vector is a scalar.
- (b) True — each component of a vector is a scalar.
- (c) False — total path length is generally greater than or equal to displacement magnitude; they are equal only in straight-line motion without change of direction.
- (d) True — average speed is greater than or equal to the magnitude of average velocity.
- (e) False — three non-coplanar vectors can add to give a null vector; for example, vectors can close in 3D to form a closed triangle/polygon.
Not sure why a step works? check your working in Super Tutor
3.6Establish the following vector inequalities geometrically or otherwise: (a) (b) When does the equality sign above apply?
3.7 Given a + b + c + d = 0, which of the following statements are correct :
(a) a, b, c, and d must each be a null vector,
(b) The magnitude of equals the magnitude of
(c) The magnitude of a can never be greater than the sum of the magnitudes of b, c, and d,
(d) must lie in the plane of a and d if a and d are not collinear, and in the line of a and d, if they are collinear?
Show solution
When does the equality sign above apply?
3.7 Given a + b + c + d = 0, which of the following statements are correct :
(a) a, b, c, and d must each be a null vector,
(b) The magnitude of equals the magnitude of
(c) The magnitude of a can never be greater than the sum of the magnitudes of b, c, and d,
(d) must lie in the plane of a and d if a and d are not collinear, and in the line of a and d, if they are collinear?
For two vectors a and b:
- The inequality is the triangle inequality. It becomes an equality when the two vectors are collinear and point in the same direction.
- The inequality becomes an equality when the two vectors are collinear and point in opposite directions.
So, the equality sign applies when the vectors are along the same straight line: same direction for the first inequality, opposite directions for the second.
Not sure why a step works? check your working in Super Tutor
3.8Three girls skating on a circular ice ground of radius 200 m start from a point P on the edge of the ground and reach a point Q diametrically opposite to P following different paths as shown in Fig. 3.19. What is the magnitude of the displacement vector for each ? For which girl is this equal to the actual length of path skate ?Fig. 3.19
Show solution
Fig. 3.19
The three girls start from P and end at Q, which is diametrically opposite to P. So the displacement for each girl is the straight-line distance PQ.
Since the radius of the circle is , the diameter is
So, the magnitude of displacement is 400 m for each girl.
The displacement is equal to the actual length of the path only for the girl who moves along the straight diameter PQ.
Not sure why a step works? check your working in Super Tutor
3.9A cyclist starts from the centre O of a circular park of radius 1 km, reaches the edge P of the park, then cycles along the circumference, and returns to the centre along QO as shown in Fig. 3.20. If the round trip takes 10 min, what is the (a) net displacement, (b) average velocity, and (c) average speed of the cyclist ?Fig. 3.20
Show solution
Fig. 3.20
The cyclist starts from the centre O and finally returns to the centre O.
(a) Net displacement
The initial and final positions are the same, so the net displacement is
(b) Average velocity
Average velocity is
Since displacement is zero,
(c) Average speed
Average speed = total distance / total time.
Distance travelled:
- from centre to edge = radius =
- along the circumference from P to Q = half the circle =
- from edge back to centre =
So total distance
Time taken = 10 min
Therefore,
Using ,
or
Not sure why a step works? check your working in Super Tutor
3.10On an open ground, a motorist follows a track that turns to his left by an angle of after every . Starting from a given turn, specify the displacement of the motorist at the third, sixth and eighth turn. Compare the magnitude of the displacement with the total path length covered by the motorist in each case.Show solution
Each turn is after 500 m, and the direction changes by 60° to the left each time.
- At the third turn: path length covered = .
The vector sum of three successive sides of a hexagonal-type path gives a resultant displacement of 1500 m.
- At the sixth turn: path length = .
After six 60° turns, the motorist completes a closed hexagonal pattern, so displacement is 0 if the path returns to the start.
- At the eighth turn: path length = .
The displacement is the resultant of the first six segments plus two more, so it is not equal to the path length and is smaller.
Thus, in every case the magnitude of displacement is less than or equal to path length; equality would hold only if motion were along a straight line.
Not sure why a step works? check your working in Super Tutor
3.11A passenger arriving in a new town wishes to go from the station to a hotel located away on a straight road from the station. A dishonest cabman takes him along a circuitous path long and reaches the hotel in . What is (a) the average speed of the taxi, (b) the magnitude of average velocity? Are the two equal?Show solution
Given:
- Total distance travelled = 23 km
- Straight-line displacement = 10 km
- Time taken = 28 min = 28/60 h
(a) Average speed
(b) Magnitude of average velocity
They are not equal because the path length is greater than the displacement.
Not sure why a step works? check your working in Super Tutor
3.12The ceiling of a long hall is high. What is the maximum horizontal distance that a ball thrown with a speed of can go without hitting the ceiling of the hall?Show solution
This is the textbook maximum horizontal distance result.
For a ball thrown with speed from a hall with ceiling height , the maximum horizontal distance without hitting the ceiling is 50 m.
Not sure why a step works? check your working in Super Tutor
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
(a) The net acceleration of a particle in circular motion is always along the radius of the circle towards the centre
(b) The velocity vector of a particle at a point is always along the tangent to the path of the particle at that point
(c) The acceleration vector of a particle in uniform circular motion averaged over one cycle is a null vector
Free with a Super Tutor account
where t is in seconds and the coefficients have the proper units for r to be in metres.
(a) Find the v and a of the particle? (b) What is the magnitude and direction of velocity of the particle at t = 2.0 s ?
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
(a) v_average = (1/2) (v(t_1) + v(t_2))
(b) v_average = [r(t_2) - r(t_1)] / (t_2 - t_1)
(c) v(t) = v(0) + a t
(d) r(t) = r(0) + v(0) t + (1/2) a t²
(e) a_average = [v(t_2) - v(t_1)] / (t_2 - t_1)
(The 'average' stands for average of the quantity over the time interval t_1 to t_2)
Free with a Super Tutor account
A scalar quantity is one that
(a) is conserved in a process
(b) can never take negative values
(c) must be dimensionless
(d) does not vary from one point to another in space
(e) has the same value for observers with different orientations of axes.
Free with a Super Tutor account
Free with a Super Tutor account
10 more solved questions in Motion in a Plane
They are free with a Super Tutor account, along with practice quizzes and flashcards for this chapter. Free to start, no card needed.
Frequently Asked Questions
What are the important topics in Motion in a Plane for Madhya Pradesh Board Class 11 Physics?
Are these NCERT Solutions for Motion in a Plane free?
How should I revise Motion in a Plane for Class 11 exams?
Sources & Official References
Content is aligned to the official syllabus. Refer to the board website for the latest curriculum.
More resources for Motion in a Plane
Practice Quiz
Test yourself with a quick quiz
Important Questions
Exam-style questions with answers
Revision Notes
Key points for last-minute revision
Formula Sheet
The chapter's formulas in one place
Chapter Summary
Understand the chapter at a glance
Concept Maps
See how topics connect
Study Plan
Step-by-step plan for this chapter
Flashcards
Quick-fire cards for active recall
Syllabus
What topics to cover
For serious students
Get the full Motion in a Plane chapter — start free.
Quizzes, flashcards, an AI doubt solver and a study plan for Madhya Pradesh Board Class 11 Physics. Free to start, no card needed.