Chemical Bonding and Molecular Structure — NCERT Solutions
Madhya Pradesh Board · Class 11 · Chemistry
NCERT question answers for Chemical Bonding and Molecular Structure, Madhya Pradesh Board Class 11 Chemistry: 40 textbook questions solved step by step.
Interactive on Super Tutor
Studying Chemical Bonding and Molecular Structure? Get the full interactive chapter.
Quizzes, flashcards, AI doubt-solver and a step-by-step study plan — built for NCERT solutions and more.
Free trial, no card needed.
The first 20 solutions are open to read. The other 20 are free with a Super Tutor account. Unlock all 40 free in Super Tutor
Exercises
4.1Explain the formation of a chemical bond.Show solution
A chemical bond is the attractive force that holds the constituent atoms, ions, etc. together in a chemical species. Bonds form because systems tend to become more stable by lowering their energy. Atoms combine either by transfer of electrons or by sharing of electrons so that they attain a stable electronic arrangement, usually an octet in the valence shell.
Not sure why a step works? check your working in Super Tutor
4.2Write Lewis dot symbols for atoms of the following elements: Mg, Na, B, O, N, Br.Show solution
Lewis dot symbols show the valence electrons as dots around the element symbol.
- Mg:
- Na:
- B:
- O:
- N:
- Br:
These dots represent the number of valence electrons in each atom.
Not sure why a step works? check your working in Super Tutor
4.3Write Lewis symbols for the following atoms and ions:S and ; Al and ; H and
Show solution
S and ; Al and ; H and
Lewis symbols show the number of valence electrons as dots around the element symbol.
- Sulphur (S) is in group 16, so it has 6 valence electrons → write 6 dots around S.
- S²⁻ has gained 2 electrons, so it has 8 valence electrons → write 8 dots around S in brackets with the charge.
- Aluminium (Al) is in group 13, so it has 3 valence electrons → write 3 dots around Al.
- Al³⁺ has lost 3 electrons, so it has no valence electrons left → no dots, only the ion symbol.
- Hydrogen (H) has 1 valence electron → write 1 dot.
- H⁻ has gained 1 electron, so it has 2 electrons (duplet) → write 2 dots around H in brackets with the charge.
So the Lewis symbols are:
- S → 6 dots
- S²⁻ → 8 dots
- Al → 3 dots
- Al³⁺ → 0 dots
- H → 1 dot
- H⁻ → 2 dots
Not sure why a step works? check your working in Super Tutor
4.4Draw the Lewis structures for the following molecules and ions :, , , ,
Show solution
, , , ,
Lewis structures are written by counting valence electrons and satisfying the octet rule as far as possible.
- H₂S: Sulphur is central. It forms two single bonds with H and has two lone pairs.
- Structure: H–S–H with two lone pairs on S.
- SiCl₄: Silicon is central. It forms four single bonds with four Cl atoms; each Cl has three lone pairs.
- Structure: Cl–Si(–Cl)(–Cl)–Cl.
- BeF₂: Beryllium is central. It forms two single bonds with two F atoms; Be has an incomplete octet.
- Structure: F–Be–F.
- CO₃²⁻: Carbon is central. One Lewis structure has one double bond and two single bonds, but the ion is best shown by three equivalent resonance structures. The negative charge is delocalised over the three O atoms.
- Structure: [O–C(=O)–O]²⁻, with resonance.
- HCOOH (formic acid): Carbon is central in the skeleton H–C–O–H with the second O double-bonded to C.
- Structure: H–C(=O)–OH.
These are the correct Lewis representations using single, double, and lone-pair arrangements.
Not sure why a step works? check your working in Super Tutor
4.5Define octet rule. Write its significance and limitations.Show solution
The octet rule states that atoms can combine either by transfer of valence electrons or by sharing of valence electrons so that each atom attains an octet in its valence shell.
Significance
- It explains the formation of many ionic and covalent bonds.
- It helps in writing Lewis structures of simple molecules and ions.
- It is especially useful for compounds of the second period elements.
Limitations
The octet rule is not universal.
- Incomplete octet: some compounds have fewer than 8 electrons around the central atom, e.g. LiCl, BeH2, BCl3, BF3.
- Odd-electron molecules: molecules like NO and NO2 do not satisfy the octet rule for all atoms.
- Expanded octet: elements beyond the second period can have more than 8 valence electrons, e.g. PF5, SF6, H2SO4.
- It does not explain molecular shape.
- It does not explain relative stability or bond energy.
Not sure why a step works? check your working in Super Tutor
4.6Write the favourable factors for the formation of ionic bond.Show solution
The favourable factors for the formation of an ionic bond are:
- Low ionization enthalpy of the atom forming the cation, so electron loss is easy.
- High negative electron gain enthalpy of the atom forming the anion, so electron gain is easy.
- Large lattice enthalpy released when gaseous ions combine to form the crystal lattice, which stabilises the ionic solid.
- Suitable arrangement and packing of ions in the crystal lattice.
Thus, ionic bonding is favoured between elements that can form ions easily and release enough energy on lattice formation to compensate for the energy absorbed in ion formation.
Not sure why a step works? check your working in Super Tutor
4.7Discuss the shape of the following molecules using the VSEPR model: BeCl₂, BCl₃, SiCl₄, AsF₅, H₂S, PH₃Show solution
Using the VSEPR model, the shapes are:
- BeCl2: central Be has 2 bond pairs and no lone pair, so the arrangement is linear; bond angle .
- BCl3: central B has 3 bond pairs and no lone pair, so the shape is trigonal planar; bond angle .
- SiCl4: central Si has 4 bond pairs and no lone pair, so the shape is tetrahedral; bond angle .
- AsF5: central As has 5 bond pairs and no lone pair, so the shape is trigonal bipyramidal.
- H2S: central S has 2 bond pairs and 2 lone pairs, so the shape is bent or V-shaped.
- PH3: central P has 3 bond pairs and 1 lone pair, so the shape is trigonal pyramidal.
The shapes follow from repulsion between electron pairs, with lone pairs causing greater distortion than bond pairs.
Not sure why a step works? check your working in Super Tutor
4.8Although geometries of NH₃ and H₂O molecules are distorted tetrahedral, bond angle in water is less than that of ammonia. Discuss.Show solution
Both NH3 and H2O have a tetrahedral arrangement of electron pairs around the central atom, but their shapes differ because of lone pair repulsion.
- In NH3, nitrogen has 3 bond pairs and 1 lone pair. The lone pair repels the bond pairs more strongly than bond pair–bond pair repulsion, so the H–N–H angle is reduced from to about .
- In H2O, oxygen has 2 bond pairs and 2 lone pairs. Here there are two lone pairs, so lone pair–lone pair and lone pair–bond pair repulsions are stronger. This compresses the H–O–H angle further, from to about .
So, the bond angle in water is less than in ammonia because H2O has more lone-pair repulsion.
Not sure why a step works? check your working in Super Tutor
4.9How do you express the bond strength in terms of bond order?Show solution
In the Lewis description, bond order is the number of bonds between two atoms.
The bond strength is expressed as follows:
- Higher bond order means greater bond enthalpy and therefore a stronger bond.
- Lower bond order means smaller bond enthalpy and a weaker bond.
So, as bond order increases, bond strength increases. For example, bond order in is 3, so it is stronger than , where bond order is 2.
Not sure why a step works? check your working in Super Tutor
4.10Define the bond length.Show solution
Bond length is defined as the equilibrium distance between the nuclei of two bonded atoms in a molecule.
Not sure why a step works? check your working in Super Tutor
4.11Explain the important aspects of resonance with reference to the CO₃²⁻ ion.Show solution
The carbonate ion, , cannot be represented correctly by a single Lewis structure because all three C–O bonds are experimentally equivalent.
- A single Lewis structure with one double bond and two single bonds would show unequal bonds, so it is inadequate.
- Therefore, is represented by three canonical forms.
- In each canonical form, the position of the double bond changes, but the actual ion is a resonance hybrid of all three.
- Resonance stabilizes the ion because the energy of the resonance hybrid is lower than any one canonical structure.
- Resonance also averages the bond characteristics, so all three C–O bonds become identical in the real ion.
Thus, the true structure of carbonate is not any one Lewis structure, but the resonance hybrid of the three canonical forms.
Not sure why a step works? check your working in Super Tutor
4.12H₃PO₃ can be represented by structures 1 and 2 shown below. Can these two structures be taken as the canonical forms of the resonance hybrid representing H₃PO₃? If not, give reasons for the same.Show solution
No, these two structures of H₃PO₃ cannot be taken as canonical forms of a resonance hybrid.
For resonance, the contributing structures must have the same skeletal arrangement of atoms; only the distribution of electrons should differ.
In H₃PO₃, the two structures differ in the position of the hydrogen atom attached to oxygen/phosphorus and therefore they do not represent resonance forms. They are not simply different electron arrangements of the same structure.
So, they are not canonical forms of a resonance hybrid.
Not sure why a step works? check your working in Super Tutor
4.13Write the resonance structures for SO₃, NO₂ and NO₃⁻.Show solution
The resonance structures are:
- : three equivalent canonical forms with one and two bonds in each form, the double bond shifting among the three oxygen atoms.
- : two canonical forms with one bond and one bond, and the unpaired electron distributed in the two forms.
- : three equivalent canonical forms with one bond and two bonds in each form, the double bond shifting among the three oxygens.
These resonance forms show that the actual molecule/ion is a resonance hybrid with equivalent or delocalised bonding.
Not sure why a step works? check your working in Super Tutor
4.14Use Lewis symbols to show electron transfer between the following atoms to form cations and anions: (a) K and S (b) Ca and O (c) Al and N.Show solution
Using Lewis symbols, electron transfer occurs as follows:
(a) K and S
- Potassium has 1 valence electron, so two K atoms each lose one electron.
- Sulfur has 6 valence electrons and gains 2 electrons.
So:
This gives .
(b) Ca and O
- Calcium loses 2 electrons.
- Oxygen gains 2 electrons.
This gives .
(c) Al and N
- Aluminium loses 3 electrons.
- Nitrogen gains 3 electrons.
This gives .
In each case, the cation and anion attain stable noble gas configurations.
Not sure why a step works? check your working in Super Tutor
4.15Although both CO₂ and H₂O are triatomic molecules, the shape of H₂O molecule is bent while that of CO₂ is linear. Explain this on the basis of dipole moment.Show solution
Although both are triatomic molecules, is bent while is linear because of the direction of bond dipoles and the overall molecular dipole moment.
- In , the molecule is linear and the two equal C=O bond dipoles act in opposite directions. They cancel each other, so the net dipole moment is zero. A linear arrangement is therefore consistent.
- In , the molecule has a bent shape. The two O–H bond dipoles do not cancel because they are at an angle of . Hence water has a net dipole moment of 1.85 D.
So, is linear due to cancellation of dipoles, while is bent because the bond dipoles add up to give a resultant dipole moment.
Not sure why a step works? check your working in Super Tutor
4.16Write the significance/applications of dipole moment.Show solution
Dipole moment is useful for several purposes:
- It helps in deciding whether a molecule is polar or non-polar.
- It gives information about the shape of molecules; for example, a zero dipole moment may suggest a symmetrical structure.
- It helps compare the polarity of bonds and molecules.
- It is useful in understanding molecular geometry in polyatomic molecules.
- It helps explain why molecules like and have different dipole moments even though both are pyramidal.
Thus, dipole moment is an important measure of the polarity and structure of molecules.
Not sure why a step works? check your working in Super Tutor
4.17Define electronegativity. How does it differ from electron gain enthalpy?Show solution
Electronegativity is the tendency of an atom in a molecule to attract the shared pair of electrons towards itself.
It differs from electron gain enthalpy as follows:
- Electronegativity is a relative tendency in a bonded state; it is not a directly measurable quantity.
- Electron gain enthalpy is the enthalpy change when a gaseous atom in the ground state gains an electron.
- Electron gain enthalpy has a definite thermodynamic meaning and can be positive or negative, whereas electronegativity is a scale-based property used for comparing atoms in molecules.
Not sure why a step works? check your working in Super Tutor
4.18Explain with the help of suitable example polar covalent bond.Show solution
A polar covalent bond is a covalent bond in which the shared electron pair is not shared equally between the two atoms because one atom is more electronegative.
For example, in HF, fluorine is much more electronegative than hydrogen. So the shared pair of electrons is pulled more towards fluorine, producing partial charges:
- H becomes
- F becomes
Thus HF contains a polar covalent bond. The molecule has a dipole moment because of this unequal distribution of charge.
Not sure why a step works? check your working in Super Tutor
4.19Arrange the bonds in order of increasing ionic character in the molecules: LiF, K₂O, N₂, SO₂ and ClF₃.Show solution
Ionic character increases with increasing difference in electronegativity.
- N₂: same atoms, so it is non-polar covalent and has the least ionic character.
- SO₂: polar covalent, but still largely covalent.
- ClF₃: more polar than SO₂ because of greater electronegativity difference.
- LiF: highly ionic.
- K₂O: also highly ionic; among the given compounds it is placed after LiF in increasing order.
So the order of increasing ionic character is:
.
Not sure why a step works? check your working in Super Tutor
4.20The skeletal structure of CH₃COOH as shown below is correct, but some of the bonds are shown incorrectly. Write the correct Lewis structure for acetic acid.Show solution
The correct Lewis structure of acetic acid, CH₃COOH, is:
H₃C–C(=O)–OH
Reasoning:
- The first carbon forms four single bonds: three with H and one with the दूसरे carbon.
- The second carbon is the carboxyl carbon. It is bonded to:
- the CH₃ group by a single bond,
- one oxygen by a double bond,
- the other oxygen by a single bond.
- The oxygen in –OH is single-bonded to carbon and hydrogen, and it has two lone pairs.
- The double-bonded oxygen has two lone pairs.
So the correct structure is CH₃–C(=O)–OH rather than a structure with all single bonds in the carboxyl group.
Not sure why a step works? check your working in Super Tutor
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
(a) (b)
Free with a Super Tutor account
Free with a Super Tutor account
; (b) ; (c) ; (d) (e)
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
(superoxide), (peroxide)
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
20 more solved questions in Chemical Bonding and Molecular Structure
They are free with a Super Tutor account, along with practice quizzes and flashcards for this chapter. Free to start, no card needed.
Frequently Asked Questions
What are the important topics in Chemical Bonding and Molecular Structure for Madhya Pradesh Board Class 11 Chemistry?
Are these NCERT Solutions for Chemical Bonding and Molecular Structure free?
How should I revise Chemical Bonding and Molecular Structure for Class 11 exams?
Sources & Official References
Content is aligned to the official syllabus. Refer to the board website for the latest curriculum.
More resources for Chemical Bonding and Molecular Structure
Practice Quiz
Test yourself with a quick quiz
Important Questions
Exam-style questions with answers
Revision Notes
Key points for last-minute revision
Chapter Summary
Understand the chapter at a glance
Concept Maps
See how topics connect
Study Plan
Step-by-step plan for this chapter
Flashcards
Quick-fire cards for active recall
Syllabus
What topics to cover
For serious students
Get the full Chemical Bonding and Molecular Structure chapter — start free.
Quizzes, flashcards, an AI doubt solver and a study plan for Madhya Pradesh Board Class 11 Chemistry. Free to start, no card needed.