Skip to main content
Chapter 8 of 14
NCERT Solutions

Exploring Some Geometric Themes — NCERT Solutions

CBSE · Class 8 · Mathematics

NCERT Solutions for Exploring Some Geometric Themes, CBSE Class 8 Mathematics: 65 textbook questions solved step by step.

74 questions80 flashcards6 formulas & key relations5 concepts

Interactive on Super Tutor

Studying Exploring Some Geometric Themes? Get the full interactive chapter.

Quizzes, flashcards, AI doubt-solver and a step-by-step study plan — built for NCERT solutions and more.

Free trial, no card needed.

65 Questions Solved · 2 Sections

The first 33 solutions are open to read. The other 32 are free with a Super Tutor account. Unlock all 65 free in Super Tutor

Exploring Some Geometric Themes

?Draw the initial few steps (at least till Step 2) of the shape sequence that leads to the Sierpinski Carpet.Show solution

Start with a square.

  • Step 0: one square.
  • Step 1: divide it into 9 equal smaller squares and remove the middle square.
  • Step 2: repeat the same process on each of the 8 remaining squares: divide each into 9 equal parts and remove the center square of each. This gives a pattern with 8 smaller blocks, each having a hole in the middle.

Not sure why a step works? check your working in Super Tutor

?Do you see any pattern in the number of holes and squares that remain at each step?Show solution

Yes. The pattern is:

  • The number of remaining squares becomes 8 times the previous step.
  • The number of holes keeps increasing by adding the number of squares that remained in the previous step.

So the remaining squares are 1,8,82,83,…1, 8, 8^2, 8^3, \dots, and the holes are 0,1,1+8,1+8+82,…0, 1, 1+8, 1+8+8^2, \dots.

Not sure why a step works? check your working in Super Tutor

?Show that by joining the midpoints of an equilateral triangle, we divide it into 4 identical equilateral triangles.

[Hint: Note that the corner triangles are isosceles.]

Show solution

Join the midpoints of the three sides of the equilateral triangle. Each joining segment is parallel to the third side, so each small triangle has angles equal to the original triangle’s angles. Since the original triangle is equilateral, all its angles are 60∘60^\circ, so each small triangle has angles 60∘,60∘,60∘60^\circ,60^\circ,60^\circ. Therefore each small triangle is also equilateral.

Also, the three corner triangles are isosceles because the two sides from a vertex to the midpoints are equal, and the central triangle is formed by three mid-segments, so all four triangles are congruent. Hence the original triangle is divided into 4 identical equilateral triangles.

Not sure why a step works? check your working in Super Tutor

1Draw the initial few steps (at least till Step 2) of the shape sequence that leads to the Sierpinski Triangle.Show solution

Start with an equilateral triangle.

  • Step 0: one triangle.
  • Step 1: join the midpoints of the sides, divide it into 4 equal equilateral triangles, and remove the central triangle.
  • Step 2: repeat the same process on each of the 3 remaining corner triangles, removing the middle triangle from each.

Not sure why a step works? check your working in Super Tutor

2Find the number of holes, and the triangles that remain at each step of the shape sequence that leads to the Sierpinski Triangle.Show solution

For the Sierpinski Triangle:

  • Step 0: there is 1 triangle and 0 holes.
  • Step 1: the central triangle is removed, so there are 1 hole and 3 triangles remaining.
  • Step 2: each of the 3 remaining triangles is split the same way, so 3 more holes are added. Total holes = 1+3=41+3=4, and the triangles remaining = 3×3=93\times 3=9.

So the pattern is:

  • Step 0: 0 holes, 1 triangle
  • Step 1: 1 hole, 3 triangles
  • Step 2: 4 holes, 9 triangles

Not sure why a step works? check your working in Super Tutor

3Find the area of the region remaining at the nnth step in each of the shape sequences that lead to the Sierpinski fractals. Take the area of the starting square/triangle to be 1 sq. unit.Show solution

Take the starting area to be 1 sq. unit.

Sierpinski Carpet

At each step, the square is divided into 9 equal parts and the middle 1 part is removed. So the remaining area is multiplied by 89\frac{8}{9} each time.

Hence area remaining at step nn is
(89)n. \left(\frac{8}{9}\right)^n.

Sierpinski Triangle

An equilateral triangle is divided into 4 equal smaller triangles and the central 1 is removed. So the remaining area is multiplied by 34\frac{3}{4} each time.

Hence area remaining at step nn is
(34)n. \left(\frac{3}{4}\right)^n.

Not sure why a step works? check your working in Super Tutor

1Draw the initial few steps (at least till Step 2) of the shape sequence that leads to the Koch Snowflake.Show solution

Start with an equilateral triangle and repeatedly do this:

  • Divide each triangle into 4 identical equilateral triangles by joining the midpoints.
  • Remove the central triangle.
  • Repeat on the remaining smaller triangles.

So the first few steps are:

  • Step 0: one filled triangle
  • Step 1: remove the center triangle
  • Step 2: remove the center triangle from each of the 3 remaining corner triangles

Not sure why a step works? check your working in Super Tutor

2Find the number of sides in the nnth step of the shape sequence that leads to the Koch Snowflake.Show solution

In the Koch Snowflake:

  • Step 0 starts with an equilateral triangle, which has 3 sides.
  • At each step, each side is replaced by 4 smaller sides.

So if SnS_n is the number of sides at step nn:
S0=3,Sn+1=4Sn. S_0=3, \qquad S_{n+1}=4S_n.
Thus,
Sn=3⋅4n. S_n=3\cdot 4^n.

Not sure why a step works? check your working in Super Tutor

3Find the perimeter of the shape at the nnth step of the sequence. Take the starting equilateral triangle to have a sidelength of 1 unit.Show solution

The starting equilateral triangle has perimeter
3×1=3. 3\times 1=3.
At each step of the Koch Snowflake, every side is replaced by 4 sides each of length one-third of the old side. So the perimeter is multiplied by
43 \frac{4}{3}
each step.

Therefore, the perimeter at step nn is
Pn=3(43)n. P_n=3\left(\frac{4}{3}\right)^n.

Not sure why a step works? check your working in Super Tutor

1Picture your name, then read off the letters backwards. Make sure to do this by sight, not by sound—really see your name! Now try with your friend’s name.Show solution

This is a visualisation exercise. You should look at your name as a shape, then read the letters in reverse order by sight. The same can be tried with a friend’s name. There is no single written answer.

Not sure why a step works? check your working in Super Tutor

2Cut off the four corners of an imaginary square, with each cut going between midpoints of adjacent edges. What shape is left over? How can you reassemble the four corners to make another square?Show solution

Cutting off all four corners of a square by joining midpoints of adjacent sides leaves a smaller square in the middle.

The four corner pieces can be rearranged to form another square because each corner piece is a triangle-like part that can fit together symmetrically to make a square when placed appropriately.

Not sure why a step works? check your working in Super Tutor

3Mark the sides of an equilateral triangle into thirds. Cut off each corner of the triangle, as far as the marks. What shape do you get?Show solution

Marking an equilateral triangle into thirds and cutting off each corner up to the marks leaves a smaller equilateral triangle in the middle.

Not sure why a step works? check your working in Super Tutor

4Mark the sides of a square into thirds and cut off each of its corners as far as the marks. What shape is left?Show solution

Marking a square into thirds and cutting off each corner up to the marks leaves an octagon.

The cut corners remove the four corners of the square, and the remaining figure has 8 sides.

Not sure why a step works? check your working in Super Tutor

5A solid whose profile has a square outlineShow solution

A solid whose profile has a square outline can be a cuboid (for example, viewed straight at one face).

Not sure why a step works? check your working in Super Tutor

6A solid whose profile has a circular outlineShow solution

A solid whose profile has a circular outline can be a cylinder or a cone, depending on the viewpoint. For example, viewed from above, both can give a circular outline.

Not sure why a step works? check your working in Super Tutor

7A solid whose profile has a triangular outlineShow solution

A solid whose profile has a triangular outline can be a cone or a pyramid from an appropriate viewpoint.

Not sure why a step works? check your working in Super Tutor

8A solid with a rectangular profile from one viewpoint and a circular profile from another viewpoint

? As we saw with the elephant, a given solid might have very different profiles from different viewpoints. Can you visualise solids that have the following contrasting profiles?

Show solution

A cylinder can have a rectangular profile from the side and a circular profile from the top. So the solid that fits is a cylinder.

Not sure why a step works? check your working in Super Tutor

9A solid with a circular profile from one viewpoint and a triangular one from another viewpoint

? As we saw with the elephant, a given solid might have very different profiles from different viewpoints. Can you visualise solids that have the following contrasting profiles?

Show solution

A cone can look circular from the top and triangular from the side. So the solid is a cone.

Not sure why a step works? check your working in Super Tutor

10A solid with a rectangular profile from one viewpoint and a triangular one from another viewpoint

? As we saw with the elephant, a given solid might have very different profiles from different viewpoints. Can you visualise solids that have the following contrasting profiles?

Show solution

A cuboid can have a rectangular profile from one viewpoint and a triangular profile from another viewpoint, depending on how it is oriented. So the solid is a cuboid.

Not sure why a step works? check your working in Super Tutor

11A solid with a trapezium shaped profile from one viewpoint and a circular one from another viewpoint

? As we saw with the elephant, a given solid might have very different profiles from different viewpoints. Can you visualise solids that have the following contrasting profiles?

Show solution

A cone can have a circular profile from one viewpoint and a trapezium-shaped profile from another viewpoint. So the solid is a cone.

Not sure why a step works? check your working in Super Tutor

12A solid with a pentagonal profile from one viewpoint and a rectangular one from another viewpoint

? As we saw with the elephant, a given solid might have very different profiles from different viewpoints. Can you visualise solids that have the following contrasting profiles?

Show solution

A prism can have a rectangular profile from one viewpoint, and if it is a pentagonal prism or another suitably oriented prism, it can have a pentagonal profile from another viewpoint. So a suitable example is a prism.

Not sure why a step works? check your working in Super Tutor

?If the congruent polygons of a prism have 10 sides, how many faces, edges and vertices does the prism have? What if the polygons have n sides?Show solution

A prism has two congruent n-sided polygonal faces and all the other faces are parallelograms.

For an nn-sided prism:

  • Faces: nn side faces + 2 bases =n+2= n+2
  • Edges: top nn + bottom nn + connecting edges n=3nn = 3n
  • Vertices: top nn + bottom n=2nn = 2n

If n=10n=10:

  • Faces =10+2=12= 10+2 = 12
  • Edges =3×10=30= 3\times 10 = 30
  • Vertices =2×10=20= 2\times 10 = 20

Not sure why a step works? check your working in Super Tutor

?If the base of a pyramid has 10 sides, how many faces, edges and vertices does the pyramid have? What if the base is an n-sided polygon?Show solution

A pyramid has a polygonal base and one apex.

For an nn-sided pyramid:

  • Faces: nn triangular side faces + 1 base =n+1= n+1
  • Edges: nn base edges + nn edges from apex to base vertices =2n= 2n
  • Vertices: nn vertices of the base + 1 apex =n+1= n+1

If the base has 10 sides:

  • Faces =10+1=11= 10+1 = 11
  • Edges =2×10=20= 2\times 10 = 20
  • Vertices =10+1=11= 10+1 = 11

Not sure why a step works? check your working in Super Tutor

24What is a net of a cube?

Fig. 4.1 is a net of a cube.

Show solution

A net is the flat shape obtained by unfolding a solid onto a plane. So a net of a cube is a flat arrangement of 6 squares that can be folded to make a cube.

Not sure why a step works? check your working in Super Tutor

25Visualise how it can be folded to form a cube.

Fig. 4.1 is a net of a cube.

Show solution

Imagine folding the square faces up along their common edges. The connected squares come together so that six squares form the six faces of a cube. The squares that are attached side by side in the net fold around to enclose space and meet at the edges, producing a cube.

Not sure why a step works? check your working in Super Tutor

1Which of the following are the nets of a cube? First, try to answer by visualisation. Then, you may use cutouts and try.

(i)

(ii)

(iii)

(iv)

(v)

(vi)

Show solution

A cube has 6 square faces. Among the given figures, the ones that can be folded into a cube are the valid cube nets. From the set shown in the exercise, the correct nets are (i), (ii), (iv), and (v).

Not sure why a step works? check your working in Super Tutor

2A cube has 11 possible net structures in total. In this count, two nets are considered the same if one can be obtained from the other by a rotation or a flip. For example, the following nets are all considered the same—Show solution

A cube has 11 possible net structures in total, counting two nets as the same if one can be obtained from the other by a rotation or a flip. So the task is to draw or list all distinct cube nets up to these transformations. The text states that there are 11 such nets, but it does not print them all in the chapter excerpt.

Not sure why a step works? check your working in Super Tutor

3Draw a net of a cuboid having sidelengths:
  • (i) 5 cm, 3 cm, and 1 cm
  • (ii) 6 cm, 3 cm, and 2 cm
Show solution

A net of a cuboid is a flat pattern of its 6 rectangular faces arranged so that it can be folded to form the cuboid.

For each cuboid, draw 6 rectangles with the given side lengths arranged in a connected pattern. One possible net is:

(i) Cuboid of 5 cm,3 cm,1 cm5\text{ cm}, 3\text{ cm}, 1\text{ cm}

  • 2 rectangles of size 5×35\times 3
  • 2 rectangles of size 5×15\times 1
  • 2 rectangles of size 3×13\times 1

A valid arrangement is to place one 5×35\times 3 rectangle in the middle, attach the four side faces around it, and attach the second 5×35\times 3 rectangle to one of the side faces.

(ii) Cuboid of 6 cm,3 cm,2 cm6\text{ cm}, 3\text{ cm}, 2\text{ cm}

  • 2 rectangles of size 6×36\times 3
  • 2 rectangles of size 6×26\times 2
  • 2 rectangles of size 3×23\times 2

Again, arrange one 6×36\times 3 rectangle in the middle, put the four side rectangles around it, and attach the second 6×36\times 3 rectangle to one of them.

Any correct net with the six corresponding rectangles is acceptable.

Not sure why a step works? check your working in Super Tutor

?What is a net of a regular tetrahedron? Which of the following are nets of a regular tetrahedron?Show solution

A regular tetrahedron has 4 faces, and all 4 are equilateral triangles.

So a net of a regular tetrahedron must consist of 4 equilateral triangles arranged in a flat pattern.

The chapter states that a regular tetrahedron has only 2 possible nets. Therefore, among the given figures, the ones that are nets of a regular tetrahedron are the two correct tetrahedron nets shown in the options — namely the first and second figures.

Not sure why a step works? check your working in Super Tutor

?Are there any other possible nets?Show solution

No. The chapter states that a regular tetrahedron has only 2 possible nets.

Not sure why a step works? check your working in Super Tutor

?What is the net of a cylinder?Show solution

The net of a cylinder is obtained by unfolding its curved surface into a rectangle, together with the two circular faces.

So the net consists of:

  • one rectangle for the curved surface,
  • two circles for the bases.

Not sure why a step works? check your working in Super Tutor

34What are the sidelengths of the rectangle obtained?

If the circular faces of a cylinder are unfolded, and if a cut is made along the height of the cylinder, as shown in the figure below, then we get

Show solution

When the curved surface of a cylinder is unfolded, it becomes a rectangle.

  • One side of the rectangle is the height of the cylinder.
  • The other side is the circumference of the circular base.

So the rectangle’s sidelengths are height and 2πr2\pi r.

Not sure why a step works? check your working in Super Tutor

?How will the net of a cone look?Show solution

The net of a cone is a circular sector for the curved surface, together with the circular base. When the cone is slit open and unrolled, the boundary becomes a part of a circle with centre at the apex point of the sector.

Not sure why a step works? check your working in Super Tutor

?If the cone is slit open along the line ll and then unrolled, what will we get?

Free with a Super Tutor account

?What is the shortest path for the ant to reach the laddu?

Laddu (at the centre of the top face)

Free with a Super Tutor account

?What about in the following case?

Laddu (at the centre of the edge)

Free with a Super Tutor account

?If we think that a certain path is the shortest, how can we be sure that it truly is, among all the infinite possibilities?

Free with a Super Tutor account

?For example, are either of these the shortest path?

Free with a Super Tutor account

45What does this show?

[Hint: Draw the net and see how these paths appear on the net.]

Free with a Super Tutor account

?Find the shortest path between the ant and the laddu in the following case:

Free with a Super Tutor account

?What is the length of the shortest path between the ant and the laddu?

Free with a Super Tutor account

1Observe the front view, top view and side view of the different lines in Fig. 4.6. Is there any relation between their lengths?

Free with a Super Tutor account

2Find the front view, top view and side view of each of the following solids, fixing its orientation with respect to the vertical, horizontal and side planes: cube, cuboid, parallelepiped, cylinder, cone, prism, and pyramid. If needed, see the next problem for clues.

Free with a Super Tutor account

3Match each of the following objects with its projections.

Free with a Super Tutor account

51What do you see?

Place an object in front of a plane, such as a wall of your room. Shine a torch light on the object in a direction perpendicular to the wall.

Free with a Super Tutor account

?Observe what happens to the size of the shadow as you vary the distance between your torch and your object.

Free with a Super Tutor account

?Why does this happen?

Free with a Super Tutor account

1Draw the top view, front view and the side view of each of the following combinations of identical cubes.

Free with a Super Tutor account

2(i)This looks like a 'C' from the front. What does it look like from the side? From the top?

Imagine eight identical cubes, glued together along faces to form the letter 'C'.

Free with a Super Tutor account

2(ii)Glue additional cubes to make a shape that looks like 'C' from the front and 'H' from the top.

Imagine eight identical cubes, glued together along faces to form the letter 'C'.

Free with a Super Tutor account

2(iii)Now, can you glue even more cubes to make it look like 'C' from the front, 'H' from the top, and 'F' from the side?

Imagine eight identical cubes, glued together along faces to form the letter 'C'.

Free with a Super Tutor account

2(iv)Can you think of other letter combinations to make with a single combination of cubes in this manner?

Imagine eight identical cubes, glued together along faces to form the letter 'C'.

Free with a Super Tutor account

3Which solid corresponds to the given top view, front view, and side view?

Front View

Top View

Side View

(v)

(vi)

(vii)

Free with a Super Tutor account

6What are the different shapes the projection of a cube can make under different orientations?

Free with a Super Tutor account

?Why is this correspondence between directions on isometric paper and axes of the solid so effective for communicating the shape of the solid?

Free with a Super Tutor account

1In addition to the 5 ways shown in Fig. 4.8, are there any additional ways of gluing four cubes together along faces? Can you visualise and draw these as well?

Free with a Super Tutor account

2Draw the following figures on the isometric grid.

[Hint: It may be useful to determine whether the edge to be currently drawn — say, along the height — goes from down to up or up to down. Accordingly, draw the line segment on the grid either in the direction of the height axis or opposite to it.]

Free with a Super Tutor account

3Is there anything strange about the path of this ball? Recreate it on the isometric grid.

[Hint: Consider a portion of this figure that is physically realisable and identify the 3 primary directions.]

Free with a Super Tutor account

4(i)Would it be possible to build a model out of actual cubes? What are the front, top, and side profiles of this impossible triangle?

Observe this triangle.

Free with a Super Tutor account

4(ii)Recreate this on an isometric grid.

Observe this triangle.

Free with a Super Tutor account

4(iii)Why does the illusion work?

Observe this triangle.

Free with a Super Tutor account

Exercises

1? Show that by joining the midpoints of an equilateral triangle, we divide it into 4 identical equilateral triangles.

[Hint: Note that the corner triangles are isosceles.]

Free with a Super Tutor account

2Can you visualise its net? This is one of its nets.

Free with a Super Tutor account

2Imagine eight identical cubes, glued together along faces to form the letter 'C'.

(i) This looks like a 'C' from the front. What does it look like from the side? From the top?
(ii) Glue additional cubes to make a shape that looks like 'C' from the front and 'H' from the top.
(iii) Now, can you glue even more cubes to make it look like 'C' from the front, 'H' from the top, and 'F' from the side?
(iv) Can you think of other letter combinations to make with a single combination of cubes in this manner?

Free with a Super Tutor account

4Observe this triangle.

(i) Would it be possible to build a model out of actual cubes? What are the front, top, and side profiles of this impossible triangle?

Free with a Super Tutor account

32 more solved questions in Exploring Some Geometric Themes

They are free with a Super Tutor account, along with practice quizzes and flashcards for this chapter. Free to start, no card needed.

Frequently Asked Questions

What are the important topics in Exploring Some Geometric Themes for CBSE Class 8 Mathematics?
Key topics in Exploring Some Geometric Themes include Fractals are self, A square is divided into 9, An equilateral triangle is divided into, Each side of an equilateral triangle. Study these first, then practise questions on each for Class 8 exams.
Are these NCERT Solutions for Exploring Some Geometric Themes free?
The first 33 of the 65 solutions on this page are open to read. The other 32 are free with a Super Tutor account — signing up is free and needs no card.
How should I revise Exploring Some Geometric Themes for Class 8 exams?
Learn the core ideas first, then work through the 74 practice questions on Exploring Some Geometric Themes. Revise definitions regularly and use flashcards for quick recall before the exam.

Sources & Official References

Content is aligned to the official syllabus. Refer to the board website for the latest curriculum.

For serious students

Get the full Exploring Some Geometric Themes chapter — start free.

Quizzes, flashcards, an AI doubt solver and a study plan for CBSE Class 8 Mathematics. Free to start, no card needed.