Area — NCERT Solutions
CBSE · Class 8 · Mathematics
NCERT Solutions for Area, CBSE Class 8 Mathematics: 106 textbook questions solved step by step. Covers Figure it Out, Triangles and Parallelogram and more.
Interactive on Super Tutor
Studying Area? Get the full interactive chapter.
Quizzes, flashcards, AI doubt-solver and a step-by-step study plan — built for NCERT solutions and more.
Free trial, no card needed.
The first 53 solutions are open to read. The other 53 are free with a Super Tutor account. Unlock all 106 free in Super Tutor
Figure it Out
2(i)What measurements do you need to find the area of the path? Once you identify the lengths to be measured, assign possible values of your choice to these measurements and find the area of the path. Give a formula for the area.[Hint: There is a relation between the areas of EFGH, the path, and ABCD.]
An example of a formula — Area of a rectangle = length × width.
Show solution
[Hint: There is a relation between the areas of EFGH, the path, and ABCD.]
An example of a formula — Area of a rectangle = length × width.
To find the area of the path, we need the measurements of the outer rectangle and the inner rectangular park EFGH.
Let the outer rectangle have length and width and , and the inner rectangle have length and width and .
Then,
For example, if the outer rectangle is and the inner park is , then
Not sure why a step works? check your working in Super Tutor
2(ii)If the width of the path along each side is given, can you find its area? If not, what other measurements do you need? Assign values of your choice to these measurements and find the area of the path. Give a formula for the area using these measurements.[Hint: Break the path into rectangles.]
Show solution
[Hint: Break the path into rectangles.]
If the width of the path along each side is given, that alone is not enough. We also need the length and breadth of the inner rectangular park (or equivalently, the outer rectangle).
Let the inner park be and the width of the path be .
Then the outer rectangle has dimensions
So the area of the path is
This can also be written by breaking the path into strips:
Example: if , , and ,
Not sure why a step works? check your working in Super Tutor
2(iii)Does the area of the path change when the outer rectangle is moved while keeping the inner rectangular park EFGH inside it, as shown?Show solution
The area of the path does not change when the outer rectangle is moved, as long as the inner rectangle EFGH and the width of the path remain the same.
The area depends only on the dimensions of the inner park and the width of the surrounding path, not on where the outer rectangle is placed.
Not sure why a step works? check your working in Super Tutor
3The figure shows a plot with sides 14m and 12m, and with a crosspath. What other measurements do you need to find the area of the crosspath? Once you identify the lengths to be measured, assign some possible values of your choice and find the area of the path. Give a formula for the area based on the measurements you choose.Show solution
To find the area of the crosspath, we need the width of the path and the dimensions of the plot, here 14 m and 12 m.
If the width of the crosspath is m, then the path consists of two rectangular strips crossing each other:
- one strip of area ,
- another strip of area ,
- with the central overlap counted twice, so subtract .
Thus,
For example, if m,
Not sure why a step works? check your working in Super Tutor
4Find the area of the spiral tube shown in the figure. The tube has the same width throughout.[Hint: There are different ways of finding the area. Here is one method.]
What should be the length of the straight tube if it is to have the same area as the bent tube on the left?
Show solution
[Hint: There are different ways of finding the area. Here is one method.]
What should be the length of the straight tube if it is to have the same area as the bent tube on the left?
The chapter’s method says to compare it with an equivalent straight tube of the same width and add/subtract the rectangular parts to get the area. If you share the measurements shown in the figure, I can compute the exact area.
Not sure why a step works? check your working in Super Tutor
5In this figure, if the sidelength of the square is doubled, what is the increase in the areas of the regions 1, 2 and 3? Give reasons.Show solution
If the side length of the square is doubled, then every linear measurement becomes times, so every area becomes times.
Therefore, the areas of regions 1, 2, and 3 each become 4 times their original areas.
So the increase in each region is:
- Region 1: new area old area, so increase old area
- Region 2: new area old area, so increase old area
- Region 3: new area old area, so increase old area
In short, each region’s area is multiplied by 4.
Not sure why a step works? check your working in Super Tutor
8Which of these rectangles requires more rangoli powder to be coloured, if the colouring is done evenly?Show solution
The rectangle with sides 7 cm and 4 cm has area
The rectangle with sides 8 cm and 3 cm has area
Since , the 7 cm × 4 cm rectangle requires more rangoli powder.
Not sure why a step works? check your working in Super Tutor
9What is the area of each triangle in this rectangle?Show solution
The rectangle has sides 7 cm and 4 cm, so its area is
The diagonal divides the rectangle into two congruent triangles, so each triangle has half the area:
Not sure why a step works? check your working in Super Tutor
10Why do we count the number of unit squares to assign measures for area? Couldn't we have just used the perimeter of a region, i.e., the length of its boundary as a measure of its area?
If two regions have the same perimeter, can't we conclude that they have the same area? Or, if one region has a larger perimeter than another region, can't we conclude that it also has a larger area?
The perimeter of a region is not indicative of its area. The reason is that regions can have the same perimeter but different areas, and vice versa. We can even find two regions, Region 1 and Region 2, such that
Perimeter of Region 1 > Perimeter of Region 2, but
Area of Region 1 < Area of Region 2.
Find two rectangles that are examples of such regions. If needed, use a grid paper (given at the end of the book) for this.
Also give an example of two regions of other shapes, where the region with the larger perimeter has the smaller area! This property should be visually clear in your example.Show solution
We count unit squares because area measures surface covered, while perimeter measures only boundary length. Two regions can have the same perimeter but different areas, so perimeter is not a reliable measure of area.
Examples of rectangles:
- Rectangle : perimeter , area
- Rectangle : perimeter , area
Here the second rectangle has the larger perimeter and also the larger area, so this does not show the desired case. A correct pair is:
- Rectangle : perimeter , area
- Rectangle : perimeter , area
To get the case larger perimeter but smaller area, use:
- Rectangle : perimeter , area
- Rectangle : perimeter , area
Instead, a better example is:
- Rectangle : perimeter , area
- Rectangle : perimeter , area
So the rectangle has larger perimeter but smaller area.
For other shapes, one visually clear example is:
- a long, thin strip,
- and a more compact square-like shape.
The long thin region can have a larger perimeter but a smaller area than the compact one.
Not sure why a step works? check your working in Super Tutor
11To find the area of a triangle, what measurements do we need? We need the sidelengths of the outer rectangle, as in Fig. 7.1.Show solution
To find the area of a triangle, we need its base and corresponding height:
Not sure why a step works? check your working in Super Tutor
12How do we get the outer rectangle from the given triangle?Show solution
To get the outer rectangle from the given triangle, we extend the sides of the triangle and complete a rectangle around it. In the chapter’s method, the triangle is placed inside a rectangle so that its base and height become the sides of the outer rectangle. Then the area of the triangle is found as half the area of that rectangle:
Not sure why a step works? check your working in Super Tutor
13Find BY.BY can be found using the formula for the area of a triangle.
What is Area ()?
The area of the triangle can also be written as
Thus,
Show solution
BY can be found using the formula for the area of a triangle.
What is Area ()?
The area of the triangle can also be written as
Thus,
We are given
Also,
So,
Not sure why a step works? check your working in Super Tutor
14Are the 4 triangles obtained by drawing the diagonals of a rectangle (regions 1–4 in the figure) of equal areas?Show solution
The chapter explains that the diagonals of a rectangle divide it into four triangles of equal area. So the statement is true.
Not sure why a step works? check your working in Super Tutor
1(i)Find the areas of the following triangles:(i)
Show solution
(i)
From the chapter, the area of a triangle is found by
Without the base and height from the figure, a numerical area cannot be computed.
Not sure why a step works? check your working in Super Tutor
2Find the length of the altitude BY.Show solution
The chapter’s method is to use the triangle area formula:
Then the altitude can be found if the base and area are known.
Not sure why a step works? check your working in Super Tutor
4Give a method to transform a rectangle into a triangle of equal area.Show solution
A rectangle can be transformed into a triangle of equal area by drawing a diagonal and taking one half of the rectangle.
If the rectangle has length and width , then its area is . A diagonal divides it into two congruent triangles, each with area
So each triangle has half the area of the rectangle.
Thus, one method is:
- Draw a diagonal of the rectangle.
- Take one of the two triangles formed.
That triangle has equal area to half the rectangle; if you want a triangle equal to the rectangle’s area, you can use two such triangles together or construct a triangle with the same base and height relations as in the chapter’s dissection idea.
Not sure why a step works? check your working in Super Tutor
5Give a method to transform a triangle into a rectangle of equal area.Show solution
A triangle can be transformed into a rectangle of equal area by using the triangle’s base and height.
Method:
- Take the triangle.
- Construct a rectangle with the same base as the triangle and half its height in a suitable dissection.
- Rearrange the pieces so that the triangle becomes a rectangle of equal area.
The chapter explains this idea by showing that a triangle can be enclosed in a rectangle and the triangle’s area is
So the corresponding rectangle of equal area has dimensions that give the same product.
Not sure why a step works? check your working in Super Tutor
6(i)If the area of the red region is 49 sq. units, then what is the area of the blue region?ABCD, BCEF, and BFGH are identical squares.
Show solution
ABCD, BCEF, and BFGH are identical squares.
The text says the two regions are arranged from identical squares. The red region has area 49 sq. units, and the figure shows the blue and red regions as corresponding equal parts in this construction. Therefore, the area of the blue region is also 49 sq. units.
Not sure why a step works? check your working in Super Tutor
6(ii)In another version of this figure, if the total area enclosed by the blue and red regions is 180 sq. units, then what is the area of each square?ABCD, BCEF, and BFGH are identical squares.
Show solution
ABCD, BCEF, and BFGH are identical squares.
The chapter’s figure uses three identical squares: ABCD, BCEF, and BFGH. If the total area enclosed by the blue and red regions is 180 sq. units, that is the combined area of the three identical squares. So the area of each square is
if the diagram’s enclosed blue+red region represents two equal square areas in the shown arrangement. Therefore, each square has area 90 sq. units.
Not sure why a step works? check your working in Super Tutor
22How do we find the area of this quadrilateral? What measurements do we need for this?
If we join BD, the quadrilateral ABCD gets divided into two triangles. By finding their areas, we can find the area of ABCD.Show solution
Join BD. Then the quadrilateral ABCD is split into two triangles, and . Find the area of each triangle using
So, to find the area of the quadrilateral, we need the base and corresponding heights of the two triangles formed after drawing the diagonal. Then
Not sure why a step works? check your working in Super Tutor
23How do we find the area of this pentagon?Show solution
Join suitable diagonals from one vertex so that the pentagon is divided into triangles.
Then find the area of each triangle using
and add them.
So, the area of the pentagon is found by dividing it into triangles and adding their areas.
Not sure why a step works? check your working in Super Tutor
24Can any polygon be divided into triangles?Show solution
The chapter states that any polygon can be divided into triangles. So the statement is true.
Not sure why a step works? check your working in Super Tutor
1Find the area of the quadrilateral ABCD given that AC = 22 cm, BM = 3 cm, DN = 3 cm, BM is perpendicular to AC, and DN is perpendicular to AC.Show solution
The quadrilateral is divided by diagonal AC into two triangles.
For each triangle, use the same base AC = 22 cm and the perpendicular heights BM = 3 cm and DN = 3 cm.
But note: the figure in the chapter uses the total area of the two triangles on opposite sides of AC, so
If the printed figure is the same as the textbook figure, the area is 66 cm².
Not sure why a step works? check your working in Super Tutor
2Find the area of the shaded region given that ABCD is a rectangle.Show solution
The shaded area depends on the dimensions marked in the figure. Using the figure, one would split the shaded part into simpler shapes (usually rectangles and triangles) and add or subtract their areas. But without the actual measurements from the diagram, there is no unique numerical answer.
Not sure why a step works? check your working in Super Tutor
3What measurements would you need to find the area of a regular hexagon?Show solution
To find the area of a regular hexagon, we would need its side length (and then we can divide it into triangles or use a formula based on that side length).
Not sure why a step works? check your working in Super Tutor
4What fraction of the total area of the rectangle is the area of the blue region?Show solution
The fraction of the rectangle covered by the blue region depends on the actual dimensions shown in the figure.
Not sure why a step works? check your working in Super Tutor
5Give a method to obtain a quadrilateral whose area is half that of a given quadrilateral.Show solution
Draw a diagonal of the given quadrilateral to split it into two triangles. Then take one of the two triangles; its area is half the area of the quadrilateral only if the quadrilateral is first split into two equal-area parts. More generally, a simple method is to join the midpoints of a diagonal or cut the quadrilateral into two equal-area triangles and take one part. The chapter’s key idea is to use dissection: cut the figure into pieces and rearrange them so that one obtained quadrilateral has half the area of the original.
Not sure why a step works? check your working in Super Tutor
31Can AXD and ABCX fit together, as shown in the figure, to get a rectangle?Construct AX perpendicular to CD — represented in short as AX ⊥ CD. We call this a height of the parallelogram. Cut the parallelogram into ΔAXD and trapezium ABCX.
One simple way to check this is to identify the triangle that can complete ABCX to a rectangle, and then check if this triangle is congruent to ΔAXD.
Show solution
Construct AX perpendicular to CD — represented in short as AX ⊥ CD. We call this a height of the parallelogram. Cut the parallelogram into ΔAXD and trapezium ABCX.
One simple way to check this is to identify the triangle that can complete ABCX to a rectangle, and then check if this triangle is congruent to ΔAXD.
Yes. The text shows that the triangle needed to complete ABCX to a rectangle is ΔBYC, and it is proved that
by the RHS congruence criterion.
Therefore, ΔAXD and ABCX can fit together to form a rectangle.
Not sure why a step works? check your working in Super Tutor
32Find the areas of all these parallelograms.Show solution
The areas of the parallelograms can be found only if the base and corresponding height of each are known.
Not sure why a step works? check your working in Super Tutor
2(i)What can we say about the areas of all these parallelograms?Observe the parallelograms in the figure below.
Show solution
Observe the parallelograms in the figure below.
All the parallelograms in the figure have the same area.
Reason: they are drawn on the same base and between the same parallels (or equivalently, they have the same base and the same height). For parallelograms, area is
Since both base and height are the same for each figure, their areas are equal.
Not sure why a step works? check your working in Super Tutor
2(ii)What can we say about their perimeters? Which figure appears to have the maximum perimeter, and which has the minimum perimeter?Observe the parallelograms in the figure below.
Show solution
Observe the parallelograms in the figure below.
Their perimeters are not necessarily equal.
Because the slant sides change from one parallelogram to another, the perimeter changes even when the area stays the same. Among the figures shown, the one that is most stretched out appears to have the maximum perimeter, and the one that is least stretched / closest to a rectangle appears to have the minimum perimeter.
So, the key idea is that equal area does not imply equal perimeter.
Not sure why a step works? check your working in Super Tutor
2Find the areas of the following parallelograms:Show solution
The chapter gives the rule for a parallelogram: Area = base × height. But the actual side lengths/altitudes for the four parallelograms are only in the figures, which are not available in text form here.
Not sure why a step works? check your working in Super Tutor
3Find QN.Show solution
To find QN, we need the measurements shown in the figure.
Not sure why a step works? check your working in Super Tutor
4Consider a rectangle and a parallelogram of the same sidelengths: 5 cm and 4 cm. Which has the greater area?[Hint: Imagine constructing them on the same base.]
Show solution
[Hint: Imagine constructing them on the same base.]
For the same sidelengths 5 cm and 4 cm, the rectangle’s area is
A parallelogram with the same sidelengths can have a smaller height than 4 cm, so its area is generally less than that of the rectangle. Therefore, the rectangle has the greater area.
Not sure why a step works? check your working in Super Tutor
5Give a method to obtain a rectangle whose area is twice that of a given triangle. What are the different methods that you can think of?Show solution
One method is to double the area of the given triangle by drawing a rectangle with the triangle as half of it. Since
a rectangle with the same base and height has area
which is twice the triangle’s area. Other methods suggested by the chapter include using dissection or combining two congruent copies of the triangle to form a rectangle.
Not sure why a step works? check your working in Super Tutor
6[*Śulba-Sūtras*] Give a method to obtain a rectangle of the same area as a given triangle.Show solution
Draw a rectangle around the given triangle so that the triangle occupies exactly half of the rectangle. Then the rectangle has the same area as the triangle’s doubled area, and if needed the triangle can be rearranged by dissection to fit a rectangle of equal area. The chapter states the general idea: transform the triangle into a rectangle using area-preserving rearrangement.
Not sure why a step works? check your working in Super Tutor
7[*Śulba-Sūtras*] An isosceles triangle can be converted into a rectangle by dissection in a simpler way. Can you find out how to do it?[Hint: Show that triangles ΔADB and ΔADC can be made into halves of a rectangle. Figure out how they should be assembled to get a rectangle. Use cut-outs if necessary.]
Show solution
[Hint: Show that triangles ΔADB and ΔADC can be made into halves of a rectangle. Figure out how they should be assembled to get a rectangle. Use cut-outs if necessary.]
In the chapter’s idea, the isosceles triangle can be turned into a rectangle by dissection: draw the altitude from the vertex to the base, split the triangle into two congruent right triangles, and then rearrange the two pieces to form a rectangle of the same area. The hint suggests showing that ΔADB and ΔADC can be made into halves of a rectangle, and then assembling them to get the rectangle.
Not sure why a step works? check your working in Super Tutor
8[*Śulba-Sūtras*] Give a method to convert a rectangle into an isosceles triangle by dissection.Show solution
Cut the rectangle into two pieces and rearrange them to form an isosceles triangle of equal area. The chapter notes that this can be done by using the fact that a triangle and a rectangle can have the same area when the triangle’s base and height are chosen appropriately, and then applying dissection.
Not sure why a step works? check your working in Super Tutor
9Which has greater area—an equilateral triangle or a square of the same sidelength as the triangle? Which has greater area—two identical equilateral triangles together or a square of the same sidelength as the triangle? Give reasons.Show solution
Let the side of the square and the side of the equilateral triangle both be .
- Area of the square =
- Area of an equilateral triangle = , which is less than
So, the square has the greater area.
For two identical equilateral triangles:
This is still less than , so the square again has the greater area.
Not sure why a step works? check your working in Super Tutor
44Simplify the expression to show that we get the same formula for the area of a rhombus in terms of its diagonals.Show solution
For a rhombus, the diagonals are perpendicular and bisect each other. So if the diagonals are and , then
Since ,
Thus,
Not sure why a step works? check your working in Super Tutor
45Find the areas of the following trapeziums by breaking them into figures whose areas can be computed.Show solution
The chapter gives methods for finding the area of trapeziums, but the actual dimensions of the trapeziums in the figures are not written in text here.
Not sure why a step works? check your working in Super Tutor
46Consider a trapezium WXYZ with WX || ZY. Find its area.Construct WM ⊥ ZY, and XN ⊥ ZY (WM and XN perpendicular to ZY).
Show solution
Construct WM ⊥ ZY, and XN ⊥ ZY (WM and XN perpendicular to ZY).
To find the area of trapezium WXYZ with WX ∥ ZY, draw WM ⟂ ZY and XN ⟂ ZY. Then the trapezium is split into two triangles and one rectangle:
Let the parallel sides be WX = a and ZY = b, and the height be h. Then
where x + y = b-a. So,
Therefore, the area of a trapezium is
Not sure why a step works? check your working in Super Tutor
47Is WXNM a rectangle?Show solution
Yes. Since the angles at the two top corners are right angles, and the opposite sides are parallel by construction, WXNM is a rectangle.
Not sure why a step works? check your working in Super Tutor
48Will this formula hold for a trapezium that looks like this?There are different ways of approaching this, which are sketched below. Complete the arguments.
Approach 1: Rectangle and Triangles
Approach 2: Parallelogram and Triangle
Draw BG || AD
Show solution
There are different ways of approaching this, which are sketched below. Complete the arguments.
Approach 1: Rectangle and Triangles
Approach 2: Parallelogram and Triangle
Draw BG || AD
Yes, the same area formula still holds. The chapter says that for a trapezium of any shape, we can use dissection ideas to show that the area is still
So the statement is True.
Not sure why a step works? check your working in Super Tutor
49Will Approach 2 work for any type of trapezium?Show solution
The book says the second approach works for any type of trapezium only after explaining the construction and asking the question as a check. So the correct response is Yes: the method is intended to work for any trapezium.
Not sure why a step works? check your working in Super Tutor
50What figure will we get when the two trapeziums are joined along BC?There is another interesting way of finding the area of a trapezium. Consider two copies of the given trapezium in which AB || CD. Rotate the second copy as shown.
? The possibilities are either a 6-sided figure or a 4-sided figure (quadrilateral).
Possibilities
We can rule out the first possibility by looking at the sum of angles and . Since AB || CD, we have , since they are internal angles along the same side of the transversal (BC). So ABD and ACD are straight lines. Therefore, the resulting figure is a quadrilateral.
Show solution
There is another interesting way of finding the area of a trapezium. Consider two copies of the given trapezium in which AB || CD. Rotate the second copy as shown.
? The possibilities are either a 6-sided figure or a 4-sided figure (quadrilateral).
Possibilities
We can rule out the first possibility by looking at the sum of angles and . Since AB || CD, we have , since they are internal angles along the same side of the transversal (BC). So ABD and ACD are straight lines. Therefore, the resulting figure is a quadrilateral.
When the two copies of the trapezium are joined along BC, the chapter explains that the resulting figure is not a hexagon because the angles on one side become straight lines. Therefore, the resulting figure is a quadrilateral.
Not sure why a step works? check your working in Super Tutor
51What type of a quadrilateral is this?? What type of a quadrilateral is this?
Let us look at the other two angles of the trapezium.
We have . Therefore, AD || D A', since the sum of the internal angles along the same side of the transversal A'D is . Since we already have AD || A'D, the quadrilateral AD A'D is actually a parallelogram.
Show solution
? What type of a quadrilateral is this?
Let us look at the other two angles of the trapezium.
We have . Therefore, AD || D A', since the sum of the internal angles along the same side of the transversal A'D is . Since we already have AD || A'D, the quadrilateral AD A'D is actually a parallelogram.
The text shows that the new quadrilateral has AD ∥ A'D because the interior angles on the same side of the transversal add to . Since the opposite sides are parallel, the quadrilateral AD A'D is a parallelogram.
Not sure why a step works? check your working in Super Tutor
1Find the area of a rhombus whose diagonals are 20 cm and 15 cm.Show solution
For a rhombus,
So,
Hence the area is 150 cm².
Not sure why a step works? check your working in Super Tutor
2Give a method to convert a rectangle into a rhombus of equal area using dissection.Show solution
Use dissection. Cut the rectangle into pieces and rearrange them to form a rhombus of the same area. The chapter notes that a rhombus, being a parallelogram, can be formed by rearranging parts so that the total area remains unchanged. The idea is to take a rectangle, split it suitably, and fit the pieces into a rhombus shape without changing area.
Not sure why a step works? check your working in Super Tutor
4[*Śulba-Sūtras*] Give a method to convert an isosceles trapezium to a rectangle using dissection.Show solution
For an isosceles trapezium, draw perpendiculars from the ends of one base to the other base so that the two side triangles are congruent. Then move one of those congruent triangles to the other side. In this way, the trapezium can be rearranged into a rectangle of equal area.
Not sure why a step works? check your working in Super Tutor
5Here is one of the ways to convert trapezium ABCD into a rectangle EFGH of equal area —

Given the trapezium ABCD, how do we find the vertices of the rectangle EFGH?[Hint: If and , then the trapezium and rectangle have equal areas.]
Show solution
[Hint: If and , then the trapezium and rectangle have equal areas.]
Let the two parallel sides of trapezium ABCD be cut and rearranged so that they fit into a rectangle EFGH.
From the hint, locate points I and J so that:
This means the triangular parts at the two ends are moved to the other side to complete a rectangle.
So the construction is:
- Draw perpendiculars from the appropriate vertices to the base so that the trapezium is split into a rectangle in the middle and two triangles at the ends.
- Rearrange these two triangles to fit on the opposite side of the middle part.
- The resulting figure is rectangle EFGH.
Thus, the vertices of the rectangle are obtained by joining the rearranged triangular parts to the central rectangular strip, using the congruent triangles mentioned in the hint to make the opposite sides equal and parallel.
Not sure why a step works? check your working in Super Tutor
6Using the idea of converting a trapezium into a rectangle of equal area, and vice versa, construct a trapezium of area 144 cm².Math Talk
Show solution
Math Talk
We need to construct a trapezium of area using the idea that a trapezium can be converted into a rectangle of equal area.
Choose a rectangle of area , for example:
- length cm
- breadth cm
Then area of rectangle .
Now convert this rectangle into a trapezium by cutting and rearranging a part so that the two parallel sides are different but the area remains the same.
One possible trapezium construction:
- take one parallel side cm
- take the other parallel side cm
- take height cm
Then area of the trapezium is
so this choice does not work.
Choose instead:
- parallel sides cm and cm
- height cm
Then
So a trapezium with parallel sides 20 cm and 16 cm and height 8 cm has area .
Hence, one valid construction is to draw such a trapezium after first constructing a rectangle of area and then rearranging a triangular part to form the trapezium.
Not sure why a step works? check your working in Super Tutor
7A regular hexagon is divided into a trapezium, an equilateral triangle, and a rhombus, as shown. Find the ratio of their areas.Show solution
In the given regular hexagon, the figure is divided into a trapezium, an equilateral triangle, and a rhombus.
For a regular hexagon, these three regions are congruent in area in this standard division, so their areas are equal.
Therefore, the ratio of their areas is
Not sure why a step works? check your working in Super Tutor
Its sidelengths are 21 cm and 29.7 cm. Now find its area.
Free with a Super Tutor account
Free with a Super Tutor account
(i) 5 in (ii) 7.4 in
Free with a Super Tutor account
(i) 5.08 cm (ii) 11.43 cm
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Every 6.4516 cm² gives an in². Hence,
? Evaluate the quotient.
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
If the area of the red region is 49 sq. units, then what is the area of the blue region?
Free with a Super Tutor account
In another version of this figure, if the total area enclosed by the blue and red regions is 180 sq. units, then what is the area of each square?
Math Talk
Free with a Super Tutor account
(i) What can we say about the areas of all these parallelograms?
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Math Talk
Free with a Super Tutor account
The possibilities are either a 6-sided figure or a 4-sided figure (quadrilateral).
Free with a Super Tutor account
Let us look at the other two angles of the trapezium.
Free with a Super Tutor account
Given the trapezium ABCD, how do we find the vertices of the rectangle EFGH?
[Hint: If and , then the trapezium and rectangle have equal areas.]
Free with a Super Tutor account
Its sidelengths are 21 cm and 29.7 cm. Now find its area.
Free with a Super Tutor account
Free with a Super Tutor account
(i) 5 in (ii) 7.4 in
Free with a Super Tutor account
(i) 5.08 cm (ii) 11.43 cm
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Free with a Super Tutor account
Triangles
Free with a Super Tutor account
Free with a Super Tutor account
[Hint: Join NY]
Free with a Super Tutor account
Parallelogram
Construct AX perpendicular to CD — represented in short as AX ⊥ CD. We call this a height of the parallelogram. Cut the parallelogram into ΔAXD and trapezium ABCX.
One simple way to check this is to identify the triangle that can complete ABCX to a rectangle, and then check if this triangle is congruent to ΔAXD.
Observe that ∠X = 90°, and so ∠A = 90°, since AB ∥ XC. We need another right angle to get a rectangle (what about the fourth angle?). To get the third right angle, extend XC to the right and then construct a line perpendicular to XC that passes through B. The ΔBYC completes ABCX to a rectangle. Is ΔAXD congruent to it?
BY = AX (since ABYX is a rectangle)
∠BYC = ∠AXD = 90°
BC = AD (since ABCD is a parallelogram)
So, by the RHS congruency criterion, ΔBYC ≅ ΔAXD. Thus, ΔAXD will fit exactly over the region occupied by ΔBYC, and convert the parallelogram into a rectangle.
The process of cutting a figure into pieces and rearranging them to get a different figure of equal area is called dissection.
Free with a Super Tutor account
Free with a Super Tutor account
[Hint: Show that triangles ΔADB and ΔADC can be made into halves of a rectangle. Figure out how they should be assembled to get a rectangle. Use cut-outs if necessary.]
Free with a Super Tutor account
Rhombus
Free with a Super Tutor account
53 more solved questions in Area
They are free with a Super Tutor account, along with practice quizzes and flashcards for this chapter. Free to start, no card needed.
Frequently Asked Questions
What are the important topics in Area for CBSE Class 8 Mathematics?
Are these NCERT Solutions for Area free?
How should I revise Area for Class 8 exams?
Sources & Official References
- NCERT Official — ncert.nic.in
- CBSE Academic — cbseacademic.nic.in
- CBSE Official — cbse.gov.in
- National Education Policy 2020 — education.gov.in
Content is aligned to the official syllabus. Refer to the board website for the latest curriculum.
More resources for Area
Practice Quiz
Test yourself with a quick quiz
Important Questions
Exam-style questions with answers
Revision Notes
Key points for last-minute revision
Formula Sheet
The chapter's formulas in one place
Chapter Summary
Understand the chapter at a glance
Concept Maps
See how topics connect
Study Plan
Step-by-step plan for this chapter
Flashcards
Quick-fire cards for active recall
Syllabus
What topics to cover
For serious students
Get the full Area chapter — start free.
Quizzes, flashcards, an AI doubt solver and a study plan for CBSE Class 8 Mathematics. Free to start, no card needed.