Skip to main content
Chapter 12 of 15
NCERT Solutions

Constructions and Tilings — NCERT Solutions

CBSE · Class 7 · Mathematics

NCERT question answers for Constructions and Tilings, CBSE Class 7 Mathematics: 17 textbook questions solved step by step.

55 questions60 flashcards7 formulas & key relations5 concepts

Interactive on Super Tutor

Studying Constructions and Tilings? Get the full interactive chapter.

Quizzes, flashcards, AI doubt-solver and a step-by-step study plan — built for NCERT solutions and more.

Free trial, no card needed.

17 Questions Solved · 3 Sections

The first 9 solutions are open to read. The other 8 are free with a Super Tutor account. Unlock all 17 free in Super Tutor

Figure it Out

1When constructing the perpendicular bisector, is it necessary to have the same radius for the arcs above and below XY? Explore this through construction, and then justify your answer.

[Hint 1: Any point that is of the same distance from X and Y lies on the perpendicular bisector.

Hint 2: We can draw the whole line if any two of its points are known.]

Show solution

No. It is not necessary to use the same radius above and below XYXY.

To draw the perpendicular bisector, we only need two points that are each at the same distance from XX and YY. One such point can be found above XYXY and another below XYXY, and the line joining them will be the perpendicular bisector.

So, the radius used for the arcs above and below can be different, as long as the pair of arcs in each case intersects at points that are equidistant from XX and YY.

Justification: Any point equidistant from XX and YY lies on the perpendicular bisector. Therefore, if we get two such points by using any radii, the line through them will still be the perpendicular bisector.

Not sure why a step works? check your working in Super Tutor

2Is it necessary to construct the pairs of arcs above and below XY? Instead, can we construct both the pairs of arcs on the same side of XY? Explore this through construction, and then justify your answer.Show solution

Yes, it is possible.

We do not have to draw the two pairs of intersecting arcs on opposite sides of XYXY. We can draw both pairs on the same side of XYXY.

Why it works:

  • Each point where two arcs intersect is at equal distance from XX and YY.
  • Any point equidistant from XX and YY lies on the perpendicular bisector of XYXY.
  • So, if we get two such points on the same side, the line joining them is still the perpendicular bisector.

Thus, the construction still gives the correct perpendicular bisector.

Not sure why a step works? check your working in Super Tutor

3While constructing one pair of intersecting arcs, is it necessary that we use the same radii for both of them? Explore this through construction, and then justify your answer.Show solution

No. While drawing one pair of intersecting arcs, the two arcs need not have the same radius.

What is necessary is this:

  • From XX, draw an arc with some radius.
  • From YY, draw an arc with the same radius as the first arc so that they can intersect and give a point equidistant from XX and YY.

So, for one pair of intersecting arcs, the two arcs must be drawn with the same radius from the two endpoints. If the radii are different, the point of intersection will not necessarily be at equal distance from both XX and YY, so the method will not work reliably.

Not sure why a step works? check your working in Super Tutor

5Come up with a method to construct the angle bisector using a rope.Show solution

A rope can be used like a compass.

Method:

  1. Fix the rope at the vertex of the angle, say OO.
  2. Stretch the rope to cut the two arms of the angle at points AA and BB so that OA=OBOA=OB.
  3. Mark the midpoint of the rope segment used, or use a second piece/marked fold to locate equal distances.
  4. With the rope stretched equally from the two cut points, find a point CC on the interior of the angle such that CA=CBCA=CB.
  5. Join OO to CC.

Then, by equal lengths in the two triangles formed, OCOC bisects the angle.

Not sure why a step works? check your working in Super Tutor

10How do we construct the petals so that they are of the maximum possible size within a given square?Show solution

To make the petals maximum possible size inside a square, we should choose the arc radius as large as possible without making the arcs go outside the square.

So the centres and radii should be chosen so that the arcs just fit within the square and touch the sides appropriately, giving the largest petals that can be drawn inside it.

In short: use the largest radius that still keeps the petals within the square.

Not sure why a step works? check your working in Super Tutor

1Complete the justification.Show solution

The tiling is possible because a 2×12\times 1 tile covers 2 unit squares, and the given grid has an even number of unit squares after removing one square from the 5×35\times 3 grid.

In the black-and-white view, each 2×12\times 1 tile covers one black square and one white square, so a region can be tiled only if it has the same number of black and white squares. In the given region, the numbers are unequal, so it is not tileable.

So the completed justification is: Since the black-and-white region has unequal numbers of black and white squares, it cannot be tiled with 2×12\times 1 tiles.

Not sure why a step works? check your working in Super Tutor

2Is an m×nm \times n grid tileable with 2×12 \times 1 tiles, if both mm and nn are even? If yes, come up with a general strategy to tile it.

One general strategy for this case is to cover each column with vertical tiles. This is possible because the number of rows is even.

Show solution

Yes. If both mm and nn are even, then the m×nm\times n grid can be tiled with 2×12\times 1 tiles.

A simple strategy is to cover the grid column by column using vertical tiles. Since the number of rows is even, each column can be completely filled by stacking 2×12\times 1 tiles vertically.

So an even-by-even grid is always tileable.

Not sure why a step works? check your working in Super Tutor

20Is an m×nm \times n grid tileable with 2×12 \times 1 tiles, if one of mm and nn is even and the other is odd? If yes, come up with a general strategy to tile it.Show solution

Yes. If one of mm and nn is even and the other is odd, then the grid is still tileable with 2×12\times 1 tiles.

Strategy: place the 2×12\times 1 tiles so that they run along the even side. For example, if mm is even and nn is odd, we can fill the grid column by column with vertical tiles, because each column has an even number of squares.

So any grid with one even dimension and one odd dimension can be tiled.

Not sure why a step works? check your working in Super Tutor

21Is an m×nm \times n grid tileable with 2×12 \times 1 tiles, if both mm and nn are odd? Give reasons.Show solution

No. If both mm and nn are odd, then the total number of unit squares in the grid is m×nm\times n, which is also odd.

But each 2×12\times 1 tile covers exactly 2 unit squares. Since 2 is even, any tiling would cover an even number of unit squares. An odd number of squares cannot be completely covered by 2×12\times 1 tiles.

So an odd-by-odd grid is not tileable with 2×12\times 1 tiles.

Not sure why a step works? check your working in Super Tutor

22Here is a 5×35 \times 3 grid, with a unit square removed. Now, it has an even number of unit squares. Is it tileable with 2×12 \times 1 tiles?

Free with a Super Tutor account

6Is the following region tileable with 2×12 \times 1 tiles?

Free with a Super Tutor account

1Are the following tilings possible?

Region to be tiled

Tile

Region to be tiled

Tile

Free with a Super Tutor account

? Figure it Out

1Justify why AB in Fig. 6.4 is the perpendicular bisector.

Free with a Super Tutor account

2Can you think of different methods to construct a 90° angle at a given point on a line using a rope?

Free with a Super Tutor account

?

2Can we break a regular hexagon into smaller pieces that can be constructed?

Free with a Super Tutor account

3Can six congruent equilateral triangles be placed together as in Fig. 6.12? If yes, will it result in a regular hexagon?

Free with a Super Tutor account

4In Fig. 6.12 can you explain why AOD, BOE and COF are straight lines?

Free with a Super Tutor account

8 more solved questions in Constructions and Tilings

They are free with a Super Tutor account, along with practice quizzes and flashcards for this chapter. Free to start, no card needed.

Frequently Asked Questions

What are the important topics in Constructions and Tilings for CBSE Class 7 Mathematics?
Key topics in Constructions and Tilings include Geometric Constructions, Perpendicular Bisector and Right Angle Construction, Angle Bisection, Angle Copying, and Parallel Lines, Trefoil Arch, Pointed Arch, and Regular Hexagon. Study these first, then practise questions on each for Class 7 exams.
Are these NCERT Solutions for Constructions and Tilings free?
The first 9 of the 17 solutions on this page are open to read. The other 8 are free with a Super Tutor account — signing up is free and needs no card.
How should I revise Constructions and Tilings for Class 7 exams?
Learn the core ideas first, then work through the 55 practice questions on Constructions and Tilings. Revise definitions regularly and use flashcards for quick recall before the exam.

Sources & Official References

Content is aligned to the official syllabus. Refer to the board website for the latest curriculum.

For serious students

Get the full Constructions and Tilings chapter — start free.

Quizzes, flashcards, an AI doubt solver and a study plan for CBSE Class 7 Mathematics. Free to start, no card needed.